Glow Speakers Panel Instructions

PA Glow Speakers – Rear Panel Instructions 

  1. Media Panel: Controls for the USB, SD, FM radio (if applicable), and Bluetooth sources. The Media Panel Mode source symbol will illuminate when that source is playing.
  2. USB Port: Connect your USB flash drive here to play music.
  3. SD Cart Slot: Insert your SD card here to play music. 
  4. Display: Displays the media panel modes for USB, SD, FM radio (if applicable), and Bluetooth. (Note: The display comes with a plastic protector on it. Remove this for optimal viewing).
  5. Mic Inputs *¼’/6.35mm & XLR): Connect a dynamic microphone to the ¼’ (6.35mm) or XLR inputs. Control the volume of the inputs using the Mic Input Volume knobs 
  6. Mic Input Volume: Turn this knob to adjust the input volume of the Mic Input.
  7. Aux Input (⅛”/3.5mm): Connect to a CD player, digital media player, or other audio source to this ⅛” (3.5mm) stereo auxiliary input. Control the volume using the Aux Input Volume knob
  8. XLR Input (XLR): Connect a line-level mixer or musical instrument to this XLR line-level input. Control the volume using the Aux Input Volume knob. Use this line-level input when linking together two Total PA Glow units 
  9. RCA Inputs: Connect a CD player, digital media player mixer, or other media source to these inputs. Control the volume using the Aux Input Volume knob
  10. Aux Input Volume: Turn this knob to adjust the input volume of the Aux Input Volume, XLR Input , and RCA Inputs. 
  11. Mix Out (XLR): Connects this XLR output to another active (powered) speaker. The level of the output is controlled be the Mic Input Volume, Aux Input Volume and Master Volume 
  12. Mic Echo: Use this knob to add or remove an echo effect to the Mic Inputs 
  13. High EQ: Increases of decreases the high (treble) frequencies for Mic Input, Line Input and Media Panel sources at a range between -12 dB to +12 dB 
  14. Low EQ: Increases or decreases the low (bass) frequencies for Mic Inputs, Line Input and Media Panel sources at a range between -12 dB to +12 dB 
  15. Master Volume: Turn this knob to adjust the overall output volume of the loudspeaker